Wednesday, September 12, 2012

Painting

Now that we are done with the floors we get to move to decorating! Yay! First step painting!

I love painting. Painting is such a cheap way to brighten up a room! We plan on painting every room in the house, because the previous owners have chosen some colors that we are just not fans of.

The dining room and kitchen walls are painted a pink [they kindly left the swatch in the cupboard so that we could use it more if we wanted to!].

The living room and master are painted a grayish sky blue. Which you cannot really see in the pictures unless you squint and look really hard at the fireplace wall and the trim [yes, they painted the trim blue.... groan.] Now, the blue would be nice, if they hadn't painted the trim the same color... but they did.

IMG_4326
[Before]

I knew I wanted the trim white-white. So, we chose Valspar’s white satin paint for the trim.

The walls were another story. At first I wanted green, then beige, then green, then gold... so we bought some paint samples and painted splotches on the wall.

2012-07-26 16.13.42
[Paint 1, Paint 2, Paint 3, Paint 4]

Question: Which is your favorite?


Tuesday, September 11, 2012

Landscaping

Good Morning! My Monday was very long, so I'm glad that it is finally over!

Last night we tried to get some things done around the house since we didn't do any work on the house
over the weekend. Mostly we just cleaned up, but we also talked about what exactly we wanted to do to the house. We are trying to figure out just what to do with the back yard (which I cannot wait to enjoy now that the weather is so nice!).

The shrubs around Our Old Colonial were left to grow for 2 years before we moved in... or so we thought... after talking to a couple of neighbors it sounds like it was left to grow for slightly longer, perhaps even the entire time the previous owners resided in the house. So we have a lot of time to make up for.

photo 5-6
[This photo is from our first visit to the house, by the time we bought the house the entire area had grown 4 feet!]

There is a lot of work that needs to be done to get the house looking good again. We are going to pressure wash the outside and then decide whether or not we need to paint the exterior. The shutters definitely need to be painted and of course the roof needs to be replaced. And then there is the lawn...

The backyard was the worst in terms of being overgrown, Matt had to be very patient with the lawnmower the first time he mowed. Fortunately, the front lawn was kept up much better and just needed a quick trim.

We also need to trim back a lot of the bushes. There are two butterfly bushes that are overgrown in front of the house and blocking our view when we come out of the driveway. In the back there is ivy growing up our beautiful pine trees and over the fence into our neighbor’s yard [sorry Bob!]. The ivy is so bad it has even knocked over a section of the fence, it is currently being propped up with a fallen branch so that Brady cannot escape.

Backyard
[We are tearing down that lattice-it is awful!]

Another item that needs to be taken care of is the
mosquito breeding pond in the backyard. The pond is all hooked up with a pump and has some water plants in it, but it doesn’t have any water and it isn’t running. So we need to decide whether we are keeping it or tossing it [or selling it]. Right now I’m leaning toward getting rid of it, I don’t think that I would really be able to maintain it and it isn’t really big enough to be a focal point. But, I’m still debating.




Monday, September 10, 2012

Busy Weekend

Happy Monday! Back to work, back to work we go! I hope that everybody had a great weekend. For us, it went by much to quickly. We have had 3 day weekends for the past two weeks and this 2 day weekend just didn't feel long enough, but we still had a wonderful time!

Friday night, after polling facebook, we went out on date (Because obviously if your "friends" on facebook say you should go out on a date, you need to go out on a date!)

Screen shot 2012-09-10 at 10.14.58 AM

It was great! The last time Matt and I went on a date was back in March, can you believe it?

I guess I should add that eating out at a fast food place because you [are too lazy] don't have time cook dinner does not qualify as a date for me. So, while we have eaten out a few times since March, none of these dinners have been dates [in my opinion]. We had a wonderful time [which was good because the food was not that great]. We sat outside and spent 4 hours catching up and talking about this and that. It was just perfect!

Saturday we headed down to Dover for some flea market shopping with my cousin Stefanie. Stefanie has been talking about taking us Spence's Flea Market since we moved and we finally got to go. It was really neat. There were several vendors with some really neat antiques, like old Christmas Cards and antique cameras and some others with real junk: old DVDs and very well used shoes (gross!).

We were more interested in the furniture and found some brass lamps that we wanted. The owner offered $35 (for the pair), which was a great deal (IMO), but for whatever reason I felt the need to haggle the price and I offered $20. He was not negotiating in the mood to negotiate and I was not in the mood to cave, so I walked away.

In the end I'm glad we didn't get the lamps because we headed over to Canterbury Used Furniture. Canterbury Used Furniture is an old house filled with gorgeous antiques and a few knickknacks here and there. We picked up an old brass floor lamp for only $10. It will be going in the living room and will work perfectly as a reading light. [picture to follow!].

We ended up getting home rather late and shopping took it out of us, so after unpacking the car we watched The Five Year Engagement, while a storm passed through. If you're looking for a goofy movie I highly recommend The Five Year Engagement, it was lighthearted and cute.

Sunday I set my alarm for 6:15 so I could get up and enjoy the cool weather that the storm brought with it and headed out for a run. It was the first cool run that I've been on since the Spring and my goodness did it feel great and made me feel ready for anything! (don't you love that feeling?)

After running 100 errands, the weekend ended at my work's fall picnic. It was a great time with friends and their families [I am really lucky to work with such a great group of people and be able to call them friends]. I haven't met most of my colleague's spouses or kids, so it was nice to get to meet their families and watch the kids splash around in the pool. I had a great time being a bad influence to all the kids (by teaching them to stick our their tongue and telling them to go grab a cookie so they would be wired right before bed). The whole experience made me grateful that we live where we live and that we work with such great people. In the end, it got me hoping that we get to stay here for a long time, but only time will tell.

We ended up getting home late from the picnic and spent the evening trying getting ready for work, but ending up calling it quits and heading to bed.

Happy Monday!

Friday, September 7, 2012

DIY: Sanding and Poly


Armed with our new sander and brand spanking new shop vac we were ready to tackle the floors. We followed a tutorial from This Old House for the refinishing the floors.

Step 1: Pulling out the carpet
The first step was to pull out the carpet and remove all the furniture from the room [which meant we needed to lug the piano into a different room].

IMG_4388
[No more carpet or furniture]

Step 2: Room Prep
Next we sealed off the rooms that weren’t getting sanded with large plastic sheets covering the doors so that we wouldn’t have to clean up afterwards.

Of course, because we had just bought the house and had not moved in yet, we didn't have any furniture. However, if you have furniture, you'll want to take it out of the room.

Step 3: Sanding
The fun part! Crank up the sander [Of course,
make sure you have the right sander and pads first].

As we said in the
last post we had to connect the sander to a shop vac to the sander because the sander’s bags had been recalled [fun stuff]. So we taped the shop vac hose to the sander to replace the bags.

First, switch on the shop vac and then start the sander. As you are sanding make sure you don’t stay in one place too long or
you’ll fall though the floor you’ll have uneven floors. I had a good time dancing with the sander to move it around. **Shake your groove thing. Shake your grove thing Sander. YEAH YEAH!**

IMG_4399

Every 5 minutes you will need to stop and vacuum off the buffer pads. This helps them keep doing their job well. However, if you’re doing a large area [as we were] you’ll want to flip them after some time and have multiple sets of pads. Otherwise, they will wear out and won’t be taking up any of the Poly.

IMG_4407

After a couple hours of hard work, your floors will be ready to clean up for the next step: applying the poly.

Step 4: Clean Up
According to the This Old House tutorial, all you have to do to do before applying the poly was vacuum, sweep and sweep again. No wet mopping at all.

So, step 4 is: Vacuum the floor. Sweep the floor with a broom and the finish by sweeping with a microfiber cloth.

After cleaning up the floor we were ready to poly! We bought water based polyurethane and went to work....

Step 5: Applying the polyurethane
At first we tried using a roller, but we kept getting bubbles in the finish, so we switched to some expensive brushes. This made things go a lot slower, but certainly the finish would turn out better.

Once we were finished putting down the poly we turned around and looked at our work... smiled, drove back to the rental and crashed. [I think we started working 6:00am and finished around 11:00pm... so you can imagine we were exhausted!]

2012-07-27 09.02.44
[New Shiny Floors!!]

Thursday, September 6, 2012

DIY: Sanding or not?

So, we had committed to buffing our floor and went over to big box store #1 to pick our the sander.

Matt asked for a sander and some maroon pads for taking off the top layer of polyurethane. Since we were not pros at this [by any stretch of the imagination!] he made sure to tell the guy at the desk exactly what we were doing. We knew we needed maroon pads because that is what the This Old House website told us. However, they didn’t have maroon, they only had red and he told us this is what we needed.

We plopped it in the back of our car and headed home, ready to sand!!

We decided to start upstairs in one of the back guest rooms since we had heard horror stories about waves in the floor from inexperienced refinishers. If we were going to have waves, we wanted them in rooms we didn’t frequent.

I tried my best at running the sander and I just couldn’t get a hold of it. It kept going the wrong way and I didn’t quite get how to use it. Apparently, you move it left and right by moving the handles up and down. I was unaware of this and kept pushing down on the handles to try and get it to sit still! I think Matt took a lot of amusement in watching the lap around me in circles!

I handed the machine over to Matt and he took at try at it. He handled it with such grace, but it wasn’t doing anything. The sander was circling, but not pulling anything up! We had the wrong buffing pads....

Wrong Buffing Pad
[Maroon does not equal red]

The pads we had were for cleaning floors [like the ones the janitors used to clean the halls in elemetary school]. At the time we were slightly exhausted from pulling up staples and may have been ready to quit, but headed over to big box store #1 to pick up the right sander and pads.

After searching for ourselves we found the correct pads that only fitted a different sander [they did not have maroon pads for the one we had]. We didn’t have the old sander to return in exchange for the correct one, but since we didn’t want to make another trip, we rented the new sander and bought the new pads.

What is more fun was when we found out that the bag [where some of the dust from the floor goes into] for the new sander was recalled. So, we would have to buy a shop vac if we wanted to rent the sander. The person telling us this was hilarious. She said, “Let me leave while you make your decision so that you can say just how much you love big box store #1”. [Mind you this had been no quick exchange, we were probably in there for 2 hours figuring out what we needed and trying to talk to].

We said some “nice” things about the store and decided to rent the sander, buy the maroon pads, and the shop vac [we needed a shop vac anyway].

IMG_4391 Pasted Graphic 3

Now we were ready to sand!

IMG_4388

Question: How many times do you think you go back and forth from home improvement stores when you do a reno?



Wednesday, September 5, 2012

DIY: Buffing Floors or Refinish Floors?

Matt and I knew as soon as we bought the house that we were going to refinish the floors, but after talking to some friends we decided to buff off the top layer of polyurethane instead. This saved us time and lots of energy.

Why buff?
Often times people simply refinish their floors [strip them down to the bare wood] to get them looking shiny and new. We were just going to jump on that bandwagon too, because we wanted shiny new floors. However, you can get shiny new floors [if you don’t have any major stains or scratches] by simply buffing off the top coat of polyurethane.

Buffing the Floor Ellie

The majority of the reasons floors look dingy is exactly that-they are dingy and the polyurethane is no longer shining like it did when it was first applied.

Typically to refinish hardwood floors you use four different types of sandpaper: 60, 80, 100, and then finally 120 to get the floor to the smooth finish you want to apply polyurethane.

So rather than sanding the floor over and over again with different grade sandpaper you simply take off the stop coat with maroon buffer pads.

Not only does this save time and energy, but it also increased the longevity of your floor. You can only refinish hardwood floors so many times because you thin the boards each time you go down to the bare wood.

Happy Buffing!

Tuesday, September 4, 2012

DIY: Remove carpet from hardwood floors

I hope everybody had a wonderful Labor Day weekend! We had a great balance of relaxing and working around the house!

Prepping the floor:

There are still staples left in the floor after Matt and I spent countless hours removing the staples from the living room and then the stairs on the days after closing. So many that my hands were blistered and exhausted. Those staples that are left are just going to have to stay there for a while.

Tools
[So many staples!]

After several hours of practice we developed a method to attack the madness. We decided that the best tools for some of the staples were needle nose pliers and a mini crowbar assisted by a rubber mallet.

Tap Tap
[Tap Tap]

To loosen the staples we tapped the mini crowbar under the staple and then pulled it [with all of our might]the rest of the way with the needle nose pliers.

IMG_4362
[Get out of mah floor!]


After 2 full evenings and 1 afternoon of pulling out staples, the living room went from:

IMG_4326
[Before]

To a living room looking like this:
IMG_4384
[After]

So much better! I find it so hard to believe the somebody would cover these beautiful floors up!

Next step: stripping off the old poly.