Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Friday, October 5, 2012

Things to do

Ahhh! The weekend is almost here. I'm counting down the hours. I have a work function this afternoon and will be obliged to stay later than I would like on a Friday to socialize. Don't get me wrong, I love my colleagues, but sometimes you just want to go home and change into sweats and a t-shirt and start the weekend right! Are you with me?

This weekend marks the first weekend in about a month that Matt and I don't have an even to go to on both Saturday and Sunday! I'm so excited! We have big plans for working on the house. We currently have a lot of projects that are only 1/2 done. In particular, a half dug out bush in our front yard that has been sitting idle for the past few weeks because we haven't had time to finish digging it out/ we didn't have the right tools. Well, now we have the right tools and time! So tomorrow, the bush will be moved!! [fingers crossed].

Here is a quick look at the before and a sketch of what the after should hopefully look like [after moving some other plants and continuing work that we have already started on the front garden].

We are copying our neighbor's garden layout, but digging out on either side of the sidewalk and filling it in with plants. We are hoping that most of the plants can be transplanted from other parts of the lawn to save some money [we are very lucky that there are lots of plants on the property just not in the right spots: IMO].

Exterior Colonial House Before
[Before]

I think that the house just looks naked, without bushes on either side of the door or any plants [aside from weeds] in front of the windows.


House Plans exterior
[Plans-aren't you jealous of my wonderful art skills?]

Wish us luck! The bushes we are trying to move will definitely be the toughest job, but hopefully come monday they will be flanking our front door.


Tuesday, September 18, 2012

Bathroom Stencil

Thank you for all of the complements on the living room! It is certainly my favorite room in the house (mind you it is the only finished room in the house)! Now I'm starting to ponder what to do with the rest of the house.

I have been toying around with the idea of getting a really nice wall paper for the downstairs bath. It is a small bath and therefore wouldn’t require much wallpaper and I think I could get away with a really bold print. Like this one:

Wallpaper

But, I am religiously against wallpaper because it always goes out of style and I hate taking it down.

So after perusing on pinterest and etsy I found a potential solution:

Stencil

A stencil! Rather than committing to a wallpaper forever, I can stencil a pattern on the wall and when I don’t like it anymore, I can paint over it! Brilliant!

They also have a lot of bird stencils that could give the same feel as the above wall paper:

Bird Wall Stencil

Lots to think about!

Friday, September 7, 2012

DIY: Sanding and Poly


Armed with our new sander and brand spanking new shop vac we were ready to tackle the floors. We followed a tutorial from This Old House for the refinishing the floors.

Step 1: Pulling out the carpet
The first step was to pull out the carpet and remove all the furniture from the room [which meant we needed to lug the piano into a different room].

IMG_4388
[No more carpet or furniture]

Step 2: Room Prep
Next we sealed off the rooms that weren’t getting sanded with large plastic sheets covering the doors so that we wouldn’t have to clean up afterwards.

Of course, because we had just bought the house and had not moved in yet, we didn't have any furniture. However, if you have furniture, you'll want to take it out of the room.

Step 3: Sanding
The fun part! Crank up the sander [Of course,
make sure you have the right sander and pads first].

As we said in the
last post we had to connect the sander to a shop vac to the sander because the sander’s bags had been recalled [fun stuff]. So we taped the shop vac hose to the sander to replace the bags.

First, switch on the shop vac and then start the sander. As you are sanding make sure you don’t stay in one place too long or
you’ll fall though the floor you’ll have uneven floors. I had a good time dancing with the sander to move it around. **Shake your groove thing. Shake your grove thing Sander. YEAH YEAH!**

IMG_4399

Every 5 minutes you will need to stop and vacuum off the buffer pads. This helps them keep doing their job well. However, if you’re doing a large area [as we were] you’ll want to flip them after some time and have multiple sets of pads. Otherwise, they will wear out and won’t be taking up any of the Poly.

IMG_4407

After a couple hours of hard work, your floors will be ready to clean up for the next step: applying the poly.

Step 4: Clean Up
According to the This Old House tutorial, all you have to do to do before applying the poly was vacuum, sweep and sweep again. No wet mopping at all.

So, step 4 is: Vacuum the floor. Sweep the floor with a broom and the finish by sweeping with a microfiber cloth.

After cleaning up the floor we were ready to poly! We bought water based polyurethane and went to work....

Step 5: Applying the polyurethane
At first we tried using a roller, but we kept getting bubbles in the finish, so we switched to some expensive brushes. This made things go a lot slower, but certainly the finish would turn out better.

Once we were finished putting down the poly we turned around and looked at our work... smiled, drove back to the rental and crashed. [I think we started working 6:00am and finished around 11:00pm... so you can imagine we were exhausted!]

2012-07-27 09.02.44
[New Shiny Floors!!]

Thursday, September 6, 2012

DIY: Sanding or not?

So, we had committed to buffing our floor and went over to big box store #1 to pick our the sander.

Matt asked for a sander and some maroon pads for taking off the top layer of polyurethane. Since we were not pros at this [by any stretch of the imagination!] he made sure to tell the guy at the desk exactly what we were doing. We knew we needed maroon pads because that is what the This Old House website told us. However, they didn’t have maroon, they only had red and he told us this is what we needed.

We plopped it in the back of our car and headed home, ready to sand!!

We decided to start upstairs in one of the back guest rooms since we had heard horror stories about waves in the floor from inexperienced refinishers. If we were going to have waves, we wanted them in rooms we didn’t frequent.

I tried my best at running the sander and I just couldn’t get a hold of it. It kept going the wrong way and I didn’t quite get how to use it. Apparently, you move it left and right by moving the handles up and down. I was unaware of this and kept pushing down on the handles to try and get it to sit still! I think Matt took a lot of amusement in watching the lap around me in circles!

I handed the machine over to Matt and he took at try at it. He handled it with such grace, but it wasn’t doing anything. The sander was circling, but not pulling anything up! We had the wrong buffing pads....

Wrong Buffing Pad
[Maroon does not equal red]

The pads we had were for cleaning floors [like the ones the janitors used to clean the halls in elemetary school]. At the time we were slightly exhausted from pulling up staples and may have been ready to quit, but headed over to big box store #1 to pick up the right sander and pads.

After searching for ourselves we found the correct pads that only fitted a different sander [they did not have maroon pads for the one we had]. We didn’t have the old sander to return in exchange for the correct one, but since we didn’t want to make another trip, we rented the new sander and bought the new pads.

What is more fun was when we found out that the bag [where some of the dust from the floor goes into] for the new sander was recalled. So, we would have to buy a shop vac if we wanted to rent the sander. The person telling us this was hilarious. She said, “Let me leave while you make your decision so that you can say just how much you love big box store #1”. [Mind you this had been no quick exchange, we were probably in there for 2 hours figuring out what we needed and trying to talk to].

We said some “nice” things about the store and decided to rent the sander, buy the maroon pads, and the shop vac [we needed a shop vac anyway].

IMG_4391 Pasted Graphic 3

Now we were ready to sand!

IMG_4388

Question: How many times do you think you go back and forth from home improvement stores when you do a reno?



Wednesday, September 5, 2012

DIY: Buffing Floors or Refinish Floors?

Matt and I knew as soon as we bought the house that we were going to refinish the floors, but after talking to some friends we decided to buff off the top layer of polyurethane instead. This saved us time and lots of energy.

Why buff?
Often times people simply refinish their floors [strip them down to the bare wood] to get them looking shiny and new. We were just going to jump on that bandwagon too, because we wanted shiny new floors. However, you can get shiny new floors [if you don’t have any major stains or scratches] by simply buffing off the top coat of polyurethane.

Buffing the Floor Ellie

The majority of the reasons floors look dingy is exactly that-they are dingy and the polyurethane is no longer shining like it did when it was first applied.

Typically to refinish hardwood floors you use four different types of sandpaper: 60, 80, 100, and then finally 120 to get the floor to the smooth finish you want to apply polyurethane.

So rather than sanding the floor over and over again with different grade sandpaper you simply take off the stop coat with maroon buffer pads.

Not only does this save time and energy, but it also increased the longevity of your floor. You can only refinish hardwood floors so many times because you thin the boards each time you go down to the bare wood.

Happy Buffing!

Tuesday, September 4, 2012

DIY: Remove carpet from hardwood floors

I hope everybody had a wonderful Labor Day weekend! We had a great balance of relaxing and working around the house!

Prepping the floor:

There are still staples left in the floor after Matt and I spent countless hours removing the staples from the living room and then the stairs on the days after closing. So many that my hands were blistered and exhausted. Those staples that are left are just going to have to stay there for a while.

Tools
[So many staples!]

After several hours of practice we developed a method to attack the madness. We decided that the best tools for some of the staples were needle nose pliers and a mini crowbar assisted by a rubber mallet.

Tap Tap
[Tap Tap]

To loosen the staples we tapped the mini crowbar under the staple and then pulled it [with all of our might]the rest of the way with the needle nose pliers.

IMG_4362
[Get out of mah floor!]


After 2 full evenings and 1 afternoon of pulling out staples, the living room went from:

IMG_4326
[Before]

To a living room looking like this:
IMG_4384
[After]

So much better! I find it so hard to believe the somebody would cover these beautiful floors up!

Next step: stripping off the old poly.